Target folder: C:\Users\Peter\DOWNLO~1\BLINKL~2
Source name:   C:\Users\Peter\Downloads\BlinkLed_interrupt\BlinkLed_INT .fcfx
Title:         VTX Controller.
Description:   Firmware for the VTX Test Bench Control,Sensor Interfaces and Communication PC GUI Application
Device:        PIC32.32MX.32MX534F064H
Generated by:  Flowcode v7.2.1.1
Date:          Wednesday, June 21, 2017 09:32:13
Users:         1
Registered to: p.erasmus
Licence key:   F5R0JX
   NOT FOR COMMERCIAL USE
http://www.matrixtsl.com
Launching the compiler...
C:\Program Files (x86)\Flowcode 7\compilers\pic32\bin\xc32-gcc.exe  -mprocessor=32MX534F064H -O1 -o "C:\Users\Peter\DOWNLO~1\BLINKL~2\BlinkLed_INT .elf" "C:\Users\Peter\DOWNLO~1\BLINKL~2\BlinkLed_INT .c"

Launching the linker/assembler...
C:\Program Files (x86)\Flowcode 7\compilers\pic32\bin\xc32-bin2hex.exe  "C:\Users\Peter\DOWNLO~1\BLINKL~2\BlinkLed_INT .elf"

Launching the programmer...
C:\Program Files (x86)\Microchip\MPLABX\v3.61\mplab_ipe\ipecmd.exe  /P32MX534F064H /F"C:\Users\Peter\DOWNLO~1\BLINKL~2\BlinkLed_INT .hex" /TPPK3 /M /OL
. . . . . . . . . . . . . .

*****************************************************
Connecting to MPLAB PICkit 3...
Currently loaded firmware on PICkit 3
Firmware Suite Version.....01.48.18
Firmware type..............PIC32MX
. . . .

Target voltage detected
Target device PIC32MX534F064H found.
Device ID Revision = 20000053
. . . . . .

Device Erased...
Programming...
The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0xfff
boot config memory
configuration memory
Programming/Verify complete
PICKIT3 Program Report
21-Jun-2017, 09:32:37
Device Type:PIC32MX534F064H
Program Succeeded.
Operation Succeeded
. . . . . . . .


FINISHED
